Please ensure Javascript is enabled for purposes of website accessibility

Our Maintenance Plans

image-asset.jpeg

Have you been considering a maintenance plan for your HVAC?

It is important for your HVAC system to receive prompt repairs and yearly maintenance to ensure it runs smoothly when you need it to. Neglecting your HVAC system means that your system may fail when you try to use it, leaving your family and home uncomfortable.

Here is our Expansive 21-Step Process Maintenance List:

1. Chemically clean and thoroughly wash condenser coils

2.  Check air filters and replace at owner's request

3.  Wash and observe condensing unit for proper motor and bearing wear

4.  Lubricate motor and fan bearings as well as other moving parts as needed

5.  Clean and inspect evaporator coil and drain pan when readily accessible

6.  Clean and inspect condensate drain lines and fittings

7.  Clean, level, and calibrate thermostat

8.  Inspect blower motor and fan assembly as needed

9.  Inspect, tighten, and test all electrical connections

10.  Inspect all cooling system electrical wires, connectors, and terminals

11.  Test system starting and running capacitors

12.  Test all controls, switches, relays, transformers, contactors, motors, and fans

13.  Measure starting and running amperes, line voltage, and control voltage

14.  Test system-starting capabilities

15.  Test system for proper airflow and air delivery

16.  Inspect and adjust all safety controls

17.  Monitor refrigerant pressures and temperatures

18.  Test and record super-heat and sub-cooling. Compare to factory specifications

19.  Adjust Freon metering control device per factory / manufacturer's recommendations

20.  Test and measure air conditioning system for proper production and capacity

21.  Complete and present a full written report


SCHEDULE AN APPOINTMENT

How to Protect Your Family from Carbon Monoxide Poisoning

Frigid temps mean our heating systems are working overtime. This also means homeowners should be aware of potential dangers with their heating system — including carbon monoxide leaks, which are hard to detect without special alarms. Carbon Monoxide is a colorless, odorless, tasteless gas that is produced any time gas is being used, and it can be deadly to humans and pets.

Leaks can come from many different sources — water heaters, boilers, gas appliances, and furnaces. It’s very important to know the risks and understand how to protect your family for carbon monoxide poisoning. Here’s what we recommend:

Depositphotos_53998491_s-2019.jpg

1. Install an Alarm

Fortunately, carbon monoxide detectors are cheap, reliable and easy to find. These alarms will alert everyone in your home to even the smallest of leaks. When shopping for a carbon monoxide alarm, be sure to choose a model that not only plugs into an outlet, but also has a battery backup in case you experience a power outage. We highly recommend purchasing several alarms, at least one on every floor and ideally one in every bedroom.

Unlike smoke, carbon monoxide is heavy and tends to gather on the ground; therefore, plug your carbon monoxide alarms into outlets closer to the floor. Each month when you test your smoke alarms, use that as an opportunity to also test your carbon monoxide detectors.

2. Know the Symptoms

If you have carbon monoxide poisoning, you may experience dizziness, nausea, headaches, weakness, confusion or chest pain. In prolonged exposure, you may also lose consciousness. If you are suspicious of a carbon monoxide leak in your home, it’s crucial that everyone (including pets) goes outside into fresh air as quickly as possible. If you’re experiencing any of the above symptoms, call 911 and seek medical attention immediately.

Don’t go back into your home until you’ve had an HVAC professional survey the area. Your home will need to be completely ventilated before it’s safe to go back inside. If your alarm ever goes off but you are not experiencing symptoms, evacuate pets, children and elderly and call your HVAC company for an emergency inspection.

3. Get a Full Heating Inspection

The best way to stay safe from carbon monoxide leaks is have your HVAC system inspected by a professional once a year. We can find small issues that may not be causing any problems now, but could lead to gas leaks in the future. This will not only save you money, but it will keep you and your family safe from things like carbon monoxide poisoning.

If you’re not sure when your last inspection was, that probably means it’s time to schedule an appointment.

Contact us today to schedule an appointment

Give us a call or click the link above  (731) 689-3651

Source Credit: https://bit.ly/30oHgin

THE BIGGEST REASON YOUR HEATING BILL IS TOO HIGH

Depositphotos_5658593_s-2019.jpg

Winter is here. With temperatures outside dropping, many homes will start to see their heating bills increase. Learn what factors can cause your bill to go up and what you can do to lower it while still keeping your home warm. 

WHAT INCREASES YOUR HEATING BILL? 

There are a few factors that can contribute to your heating bill being higher than normal in the winter months. 

 

Seasonal Changes 

Obviously, as it gets colder outside, we want to be warmer inside our homes. This causes people to set their thermostats higher than normal to really crank up the heat. Depending on the temperature change between your home and the outside world, your furnace could be working overtime to maintain the heat that keeps you comfortable.  

Additional Laundry 

One way to combat the chill in the winter is to pile on layers. Whether it’s extra clothes or multiple blankets, all of these items are going to need to be washed at some point. This will result in having to do more laundry, and constantly running the dryer will also increase your energy or heating bill. 

Poor Insulation 

If your home is older, or not properly insulated, you could be losing heat through leaky windows or drafty doors. Since the heat is leaking freely due to poor insulation, you might find that you’ll need to run your heater more often or at a higher temperature to maintain your comfort levels. This will significantly increase your heating bill and you’ll be left wondering why your house doesn’t seem as warm as it should be when the heater is always running.

Inefficient Furnace  

Another large hit to your wallet could be the fact that your furnace isn’t functioning as it should. If the heating system is outdated or hasn’t been serviced in a while, it could be struggling to hit optimal performance. 

 

HOW TO LOWER YOUR HEATING BILL  

If you want to bring your heating bill down, there are a few steps you can take to reduce the amount of energy you are using in your home. 

Set Your Thermostat to a Lower Temperature 

While this may seem counterproductive when you want to stay warm, you likely won’t feel it if you drop the temperature a few degrees. However, those few degrees could save about 5% to 10% on your heating costs. 

Purchase a Programmable Thermostat 

When you set your regular thermostat, it will cycle at all hours of the day and night to ensure that your home stays at the temperature you desire. With a programmable thermostat, the system can be set to only run when people are home. This helps reduce the cost of your heating bill since you are only using the heat when you need it instead of heating or cooling an empty house.  

Bundle Up With Layers 

Keeping your home at a lower temperature and staying warm with layers can help you stay comfortable while also keeping your heating bill down. With the thermostat lowered, the extra laundry won’t adversely affect your energy or heating bill. Wear thick socks, layer shirts and sweaters, or cuddle up under some blankets so that you can stay warm without spending extra money. 

 Increase Insulation 

Whether you need to add weatherstripping around doors or want to upgrade to double-paned windows, taking these steps can increase the insulation in your home and help keep the heat inside. Not only will the added insulation help keep you warm in the winter — it will also help keep you cool in the summer and save on year-round energy costs.  

 Get Your Furnace Serviced

To prevent your furnace from overworking, you’ll want to get it checked to ensure that everything is working properly. It is recommended that furnaces are serviced at least once a year, especially before the colder months set in. Our HVAC specialists can check all aspects of the furnace and perform a quick tuneup to get your system functioning correctly. 

Source Credit: https://bit.ly/2RhxlY5

Why Consider Crawl Space Encapsulation

Once you've learned about the benefits of encapsulation and have a quote from Harbin Heating and Air Conditioning, Inc., it may be immediately apparent to you that the best move is to have the work done. If, however, you're hesitating to spend thousands of dollars on a part of the house you rarely visit, let's look at some of the reasons to encapsulate:

The Benefits of GeoThermal

The word “Geo” is Greek and means “Earth.” The word “Thermal” is Greek and means “heat.” Geothermal energy helps to reduce emissions that cause harmful climate changes. Emissions endanger children and pose a health risk to everyone. The Earth is packed full of energy that can be harvested quite easily.

Geothermal energy has been in the Earth since the beginning in many forms including decaying minerals and more. Back in the ancient Roman times, people used geothermal energy to heat homes and baths.

3 Benefits of Duct Cleaning During the Winter

When you think of seasonal allergies, your mind probably jumps to the springtime when plants grow and flowers bloom. But for many people, allergies are a problem throughout the year, which is why it’s beneficial to keep your home clean and free from allergens. One easy way to limit allergic symptoms is to have your air ducts cleaned before winter hits.